Komotar Meet in Krško

We all dream of being fast and furious sometimes, don’t we?

On September 15th, everybody will get a chance to become the next Vin Diesel. Well known vlogger Komotar Minuta challenged everyone to a race off.The winner of his challenge will get an opportunity to drive a real formula race car. You can get more info about the challenge alone by clicking on the link below.

Where adrenalin is at it’s highest and that addictive petrol scent is in the air, that’s where we feel the most comfortable. That’s why you’ll find us there, alongside Komotar Minuta, doing a few attractive laps with our race cars and just enjoying the company.

See you on 15th September at 9 am. Raceland Krško expects you!



Test sessions in Vrtojba

Even though it’s summer and most are enjoying well deserved vacation days, our team does not rest. A group of our engineers spent last Sunday on a racetrack in Vrtojba, where a test session for press and some sponsors was held. Joining us in great atmosphere were Gregor Pavsic from Siol.net Avtomoto, David Stropnik from POP Read more…

Second race finished

Just a day after returning from the Netherlands, the other half of the team returned from the race in Italy. We returned with bittersweet feelings because our baby Eldrax didn’t pass the scrutineering. But no worries, our clever engineers are working on it right now. In spite of that, the race Read more…

Greetings from Italy

Saluto dall’Italia! We are finally on the venue of our second race at Autodromo Riccardo Paletti, near the town Varano di’Melegari. Our camp and the garage are set and looking superior. Yesterday we managed all regarding the registrations and in the evening we attended the opening ceremony with ANFIA presentation, Read more…

Partner REC d.o.o.

We are so pleased to be working with some smaller companies based in our home country, which are with their revolutionary ideas and products slowly climbing towards the top. One of those is a company REC d.o.o., based in Postojna, Slovenia. They seek to find high tech solutions in the Read more…

Partner RECA d.o.o.

The company RECA d.o.o. made sure that the components won’t fall apart, because they provided lots of fasteners (screws, bolts, nuts and washers). Not only that our partners provide products that build our car, they also help us form different and lifelong alliances. Thank you.  

First impressions from 2018 Roll out

Rollout was a total success!! We invite you to view pictures, read articles and listen to a podcast. Thank you for your support and visit!  Our team enjoyed every second of the event! Avto magazin: https://www.avto-magazin.si/…/elektricni-studentski-dirkal…/ Siol.net Avtomoto: https://siol.net/…/slovensko-znanje-in-gospodarski-kader-pr… Ta hitri: http://www.tahitri.si/2018/06/02/006-tim-novak/ foto Modlic: https://www.facebook.com/pg/fotoModlic/photos/?tab=album&album_id=10156409840527733  

Partner SKF

The car is getting together at light speed thanks to our diligent workforce and generous partners who bring smiles to our faces everiday. Our partner SKF made us ecstatic with new roller bearings, needle roller bearings, units and housings. Thank you.

Partner Impol

Aluminium is awesome! We have received a new shipment of aluminium rods and bars made from alloy 7075-T6. It has excellent mechanical properties, which is perfect for making high quality products. We are looking forward to get our hands dirty and turn them into the components of our race car. Our Read more…

Partner Siliko d.o.o.

We are on fire! The excitement about the new components for our planetary transmission which have been provided by our loving partner Siliko doo is growing within minutes. Planetary gears have to be made from good quality materials because they transmit high powers at high speed rotation. Aluminium alloy 7075-T6 is Read more…


Wild! Only this word can describe how much fun we had this weekend in an adrenaline-colored motivational team gathering with gocartes in Raceland Krško in the company of Hitri Dirkač! Now we are full of energy, back in the workshop and we are creating Eldrax, our new racing beast, which Read more…

Partner TPV Group

Our loyal partner @TPV Group has once again outdone itself! Laser cuts are mostly used for the production of stencils, with the help of which we make all the necessary holes on the monocoque and for the production of some aerodynamic molds. Thank you very much!

Science on the street

A few days ago we participated in the high-profile Science on the street project which took place at the Slovenian Academy of Sciences and Art (ZRC SAZU) atrium. In an admirable interview our leader Tim Novak and prof. Jernej Klemenc PhD exhibited our past achievements, future goals and discussed the Read more…

Partner Kolektor

Just look at this great result of our team and one of our loyal partners!  Through the machining and milling processes on the latest CNC devices, Kolektor has made holes, hubs and wheel nuts (center lock) from the high-strength Aluminum material, series 7075-T6, and let us just say that all Read more…


When you combine an innovative idea and modern technology! The work of milling our model was entrusted to our partner, JIB DESIGN, a top expert in the field of nautical design and engineering. They have done more than excellent job, for which we are most grateful to them!


Happy moments when we transform ideas into reality! A brand new carbon rim for our new racing beast will be created in cooperation with our partner Rotobox, who are the experts in the manufacture of carbon wheels for sport bikes.

Sinter Brakes

Action! We are already in preparation for our 2nd testing on a specialized Krauss test-bench with intentions of validating our own design and testing the thermal properties of our new rotors in association with our partner Sinter, for which we are very grateful.

ATG Zupan

Snow white colour reigns in this winter, not only outside, but also in our workshop! We give our thanks to our partner ATG Zupan for finishing and lacquering our mold for the race car, they did a wonderful job, it looks great!


This is craaazy! We crossed the magic limit of 2000th like on our Facebook page! Wuhuu! Our team is most grateful to you for all given support, encouragement and friendly thoughts! We remain bold, energetic, driven and connected as family! We will soon reveal our progress in the development of this Read more…

Merry x-mas

Yaay, it’s x-mas time, and also a time when our team takes a moment to be merry. We wish you holidays full of warmth, sincere joy, and time spent with your loved ones! Ho ho ho Santa Jeeej, veseli čas je tu, čas, ko tudi naša ekipa za trenutek odloži Read more…

Kolektor event

Our weekend has passed in a pleasant family atmosphere at an event organized by our sponsor Kolektor! Thank you for your invitation! We are always delighted to see this sincere enthusiasm and cute driving simulation of a racecar under the children’s arms.

ECOmeet 2017

The previous Saturday of the Superior Engineering team was very ECO-fun! We were very proud to have been able to co-create the bigest event in the field of electric and ecological vehicles in Slovenia, @ECOmeet2017! Thank you all for paying us a visit and your kind words, see you again Read more…

ECOmeet 2017

Where do you find us this Saturday? At ECOmeet 2017, of course! We will present you our plans for our furst student formula on electric drive, which will be the parade horse of our new racing season! Electric scooters, “custom” electric bikes, electric cars, ecological workshops, numerous activities! Come, it will be Read more…

1st MAHLE eco rally

In the past week, we had the honor to participate in @ 1. MAHLE eco rally competition, featuring our team leader Tim Novak at fourth place in total, he proved his driving skills in electric vehicles. A two-day event was an unforgettable experience, in addition to rally competition, an interesting entertainment, Read more…

Raceland Krško

On Thursday, we were bathing in sun rays at Raceland Krško at the event of our sponsor Sinter Brakes, where we had lots of fun and enjoyed in a wonderful racing atmosphere! We are really glad that we have made such strong ties with our sponsors and we look forward to Read more…


RESULTS 1. Acceleration IC 1. AutoX IC (didn’t count for overall result) 14. overall Dynamic events And we are back home! First and foremost the atmosphere at Formula Student Hungary event was the best!! We enjoyed it a lot! Nice on site accommodation, beautiful town Györ, great party, some street racing… Read more…

Formula Student Germany

A few days ago, some of our electrical engineers visited Formula Student Germany where they enthusiastically absorbed all possible details of the construction of the electric formulas made by the competitors. They will certainly use new knowledge to build their own in the upcoming competition season. Thank you, Mr. Požar Read more…

Formula Student Austria

Today unfortunately we were only spectators at Formula Student Austria, but we had a great time watching the best teams in the world driving the endurance event. We also took this opportunity to return some parts to joanneum racing graz which they lent us for the competition in UK. We are really grateful Read more…

Formula Student UK

After a great success in Netherlands with Minka, our team moved to Silverstone in the UK where we competed against 75 teams. We entered this competition with our new, more powerful car – Griffin. Flying high after the success in Assen we came to UK confident, but we soon received Read more…

Silverstone LIVE!

Attention attention! Follow us live in the Silverstone contest! You can expect us around 15:00, so you still have time to prepare a popcorn and sit comfortably and then cheer for us! https://www.youtube.com/watch?v=akWKWoqZvqg&app=desktop

Formula Student – Silverstone

Juuuhuu! After a few long days (also the reason for fewer posts), due to minor technical problems we have finally completed all technical inspections! Now we are looking forward to the line for royal discipline, Endurance. Keep your fingers crossed for our driver and lets hope the typical English weather endures!


Braaap! We successfully won the 9th place in acceleration. At the same time we achieved excellent 5th places from 16 teams in Skid Pad and Auto Cross! The final preparations for tomorrow’s royal discipline, a 22-kilometer Endurance, are now being finalized. Keep your fngers crossed for our team! Braaap! 😃 Takole smo Read more…


Juuhuu! Today in the morning we successfully passed all technical examinations and tests. We also finished the presentations and we are just waiting for the dynamic part of the competition! Tomorrow, we have Skid Pad, Acceleration and Auto Cross, hold your fists for our boys.

Testing video

Quickly read and see the summary of our testing from Logatec at Siol.netNews, because next time you hear from us, we may already be on the way to competitions! Wuhuuu, but now it’s for real! https://siol.net/avtomoto/zgodbe/prototip-studentov-iz-ljubljane-ze-na-asfaltu-formula-je-hitra-in-adrenalinsko-glasna-video-445095

Intense preparations

Did you think we were asleep? Not at all! Take a look at video of our intense preparations and testing for upcoming competitions! Testing 2017 Kaj ste mislili, da smo zaspali? 😛 Nikakor! Oglejte si posnetek naših intenzivnih priprav in testiranja za prihajajoča tekmovanja! ;)————————————————————–Did you think we were asleep? 😛 Read more…

Anti-roll bar treatment

This is how a heat treatment of levers ot the anti – roll bar looks like! Well done, boys! Heat treatment Tako pa izgleda toplotna obdelava ročic prečnega stabilizatorja! Bravo, dečki! :D—————————This is how a heat treatment of levers ot the anti – roll bar looks like! Well done, boys! Read more…